How to Camo Paint a Rifle - MDT Mention

How to Camo Paint a Rifle - MDT Mention

YouTuber PYRATE Firearms and Reloading created a viewer-requested video showing his rifle camouflage painting process on a compact bolt action rifle, which featured a Tikka T3 and an MDT HNT26 Chassis System!

At first glance, the HNT 26 Chassis is eye-catching with its raw carbon fiber inserts and bodywork. While this rifle chassis may look good, many hunters and shooters require a lower profile look to their firearms and gear so they do not stand out in certain environments. PYRATE Firearms & Reloading uses three Krylon “Ultra Flat” Camouflage spray paints to camouflage his rifle.

To start, the host tapes off holes in his rifle’s receiver, the optic’s scope lenses, the rubber recoil pad, the rifle’s muzzle, and the magazine well. He commences with the lightest tan paint color and applies a very light coat of the paint to promote the adhesion of the following layers. The entire rifle is sprayed with this light coat.

Note the muzzle, receiver and scope caps protecting the bore, inside of the receiver and lenses. When painting, make sure to do it in a well ventilated area.

With the first coat of paint dried, a second, thicker layer of tan paint is applied to all parts of the rifle. After twenty minutes of drying, flat brown paint is sprayed onto all sides of the rifle in a “stripe” pattern to break up the silhouette of the rifle’s body against the previously applied light tan paint.

To finish the paint job, a flat “Olive” green paint that helps blend the bolder brown paint with the light tan base coat is applied on the rifle in patches. Finally, the host removes all masking tape from the rifle and reattaches all removed parts. Reference photos are provided in the video showing the rifle blending into the host’s local wilderness.

Very effective paint job!

DIY RESOURCES FROM MDT

Check out the PYRATE Firearms and Reloading YouTube Channel for more great content!

Related Posts

Outdoor Life: The New Mountain Rifle

Building a mountain rifle generally follows the path of building the lightest possible rifle. It makes sense, right? Who wants to carry a heavy...
Post by MDT Sporting Goods
Jun 18 2026

Three Uses for a Chronograph

There’s no doubt we are living in the golden age of long-range shooting. And the reason this is the case is largely because of...
Post by MDT Sporting Goods
Jun 17 2026

Chad Kelly Tries NANOGUARD!

MDT’s NANOGUARD is a line of industrial-grade firearm care and maintenance products. What’s even more interesting is that NANOGUARD is derived from lubricants used...
Post by MDT Sporting Goods
Jun 16 2026

Pursuit of Accuracy: MDT Premier Gen2 CZ 457 Build

The MDT ACC Premier Gen 2 for the CZ 457 is positioned as a more affordable, stripped-down version of the ACC Elite, designed to...
Post by MDT Sporting Goods
Jun 11 2026

Shaking out the MDT DRT Chassis at the Real World Sniper Challenge

Over the past few weeks, I had the unique opportunity, as a supported shooter for MDT, to test the brand-new DRT chassis during the...
Post by MDT Sporting Goods
Jun 10 2026

RimfireSS MDT ACC Premier Gen2 10/22 Build

Long-range shooters and competitors have traditionally used .22-caliber rimfires for practice. Some do so to save money, while others have limited access to ranges....
Post by MDT Sporting Goods
Jun 09 2026

MDT COMPETITION MUZZLE BRAKE

Firearms YouTuber Gavin Gear recently posted a video on his channel Ultimate Reloader, providing a detailed look at the MDT Competition Muzzle Brake. Gavin...
Post by MDT Sporting Goods
Jun 04 2026

5 Reasons to Ditch Ballistic Calculators in Training (At First)

Ballistic calculators are incredible tools—and I use them, teach them, and absolutely believe they have a place in precision shooting. But there’s a problem:...
Post by MDT Sporting Goods
Jun 03 2026