Impact Shooting - Carbon Rings - MDT Mention

Impact Shooting - Carbon Rings - MDT Mention

Several weeks ago, we published an article written by Matt Hornback about his experiences with the Carbon Ring. Further research led us to a great video from IMPACT Shooting, where the host, Pieter, discusses what carbon rings are, why they form, and their effects. He talks about his experience with carbon rings and what he does to manage them.

Pieter's recent woes with carbon rings started with his 6mm Dasher when he encountered severe pressure fluctuations and damaged shell casings. Upon speaking with a friend, the host was reminded of the hallmarks of carbon rings and checked his bore with a borescope to see what was causing the symptoms he experienced while at his last range session.

Pieter does a fantastic job discussing carbon rings.

The host shows a live video feed inside the bore of one of his precision rifles. The presence of a carbon ring and the materialization of a second carbon ring are seen within his rifle's barrel. After normal cleaning methods failed, Pieter removed the large black handle from a cleaning rod. The rod was inserted into a drill, and a nylon brush was attached to the end. The host drew a mark on the cleaning rod to position the brush over the carbon ring. After inserting the rod into the barrel and letting the carbon solvent-soaked brush spin for a few minutes, the carbon ring was removed.

A graphic representation of where carbon rings form.

Pieter mentions the importance of caution when utilizing non-conventional methods to clean out precision rifle barrels. He also emphasized that trimming his brass casings too short might be the main culprit behind his carbon ring issues. Deep-cleaning a rifle chamber is also noted as one of the main preventative measures that may stop carbon rings from forming, especially in suppressor-equipped firearms where carbon tends to build quickly.

COMPETITION AND HUNTING RESOURCES FROM MDT

Make sure to check out the Impact Shooting YouTube channel for some great content! 

Related Posts

Flat-Shooting Cartridges: Why Do They Matter, and What Are the Drawbacks?

We hear the same phrases over and over in the precision rifle industry: flat-shooting cartridges, higher muzzle velocity, higher ballistic coefficient, and less bullet...
Post by MDT Sporting Goods
Nov 05 2026

Impact Shooting: Tikka T3x 300 WSM Hunting Rifle Build

In his latest “Box to Bush” video, Piet of Impact Media transforms a brand-new factory Tikka T3x chambered in .300 Winchester Short Magnum (.300...
Post by MDT Sporting Goods
Nov 04 2026

AREA 419 | Law Enforcement Sniper Systems—Build Breakdown

While we mostly see MDT products used by competitors, sportsmen, and enthusiasts, that doesn’t mean they aren’t built for the demanding needs of law...
Post by MDT Sporting Goods
Nov 03 2026

Mounting a Rifle Scope? Avoid These 5 Mistakes

Mounting a rifle scope is well within the capabilities of anyone who can use a screwdriver without injuring themselves. However, there are some careful...
Post by MDT Sporting Goods
Oct 29 2026

Ultimate Reloader: Bergara Competition Elite - 6mm Dasher at 1 Mile!

I love it when manufacturers deliver on their promises. In the world of precision rifles, there's an awful lot of hyperbole (anyone remember the...
Post by MDT Sporting Goods
Oct 28 2026

Beyond Rifles and Optics: Four Predator Hunting Essentials

This isn’t going to be another rifle, scope, or caliber article. Instead, I want to talk about the small pieces of gear I’ve learned...
Post by MDT Sporting Goods
Oct 27 2026

Impact Shooting: 7 Sherman Short Magnum at 1 Kilometer

The 7 Sherman Short Magnum continues to impress as a capable long-range hunting cartridge, and Piet put its performance on full display at Impact...
Post by MDT Sporting Goods
Oct 22 2026

Preparing for a Western Coues Deer Hunt

Over the years, I’ve found that my business rarely involves training someone for a weekend and never seeing them again. More commonly, I work...
Post by MDT Sporting Goods
Oct 21 2026