Backfire: Six Secrets For Sighting In Your Rifle

Backfire: Six Secrets For Sighting In Your Rifle

In preparation for the airing of 'American Air Gunners' on the Outdoors Channel, the YouTube channel 'Backfire' shot a video showing the host's tips for sighting in rifles. The host explains that a traditional boresight is the most reliable way to start the sight-in process. He sets up at 50 Yards and lays prone, using a sandbag and MDT CKYE-POD for support. He then removes the rifle's bolt and aligns the barrel with his target, noting that this can be done with a laser boresight for those restricted by their eyesight. Then, he dials his windage and elevation turrets to align his optic's crosshair with the target. This process helps him land his first shot on paper before fine-tuning his zero.

The second shot at 50 yards lands on target slightly low of center, which is good considering the host is looking to get a perfect 100-yard zero. Another option for sighting in is the host's "Party Trick" method. This method requires the shooter to keep their rifle stable after a shot is landed on paper while zeroing. The reticle is held at the center of the bullseye and then dialed to match the impact of the round.

Should the zeroing process require enough shots to warm the barrel, the host demonstrates his process for confirming zero with a cool barrel. Six series of three-round groups are shot. A barrel cooler is used between each series of shots, and seven minutes are given for the barrel to return to ambient temperature.

For testing, Jim used a Bergara Premiere Divide.

Lastly, the use of "turret tags" is demonstrated on camera. Most long-range shooters have seen "dope cards" that provide a quick reference guide for holds and ballistic information at different distances and are often taped to a shooter's rifle stocks. Instead of using dope cards, 'Backfire' created small colored stickers that were applied to the optic turrets during the zeroing process. These stickers allow shooters to make rapid adjustments while shooting at varying distances and not moving their eyes from downrange, like when referencing a stock-mounted dope card.

COMPETITION RESOURCES FROM MDT

Related Posts

Flat-Shooting Cartridges: Why Do They Matter, and What Are the Drawbacks?

We hear the same phrases over and over in the precision rifle industry: flat-shooting cartridges, higher muzzle velocity, higher ballistic coefficient, and less bullet...
Post by MDT Sporting Goods
Nov 05 2026

Impact Shooting: Tikka T3x 300 WSM Hunting Rifle Build

In his latest “Box to Bush” video, Piet of Impact Media transforms a brand-new factory Tikka T3x chambered in .300 Winchester Short Magnum (.300...
Post by MDT Sporting Goods
Nov 04 2026

AREA 419 | Law Enforcement Sniper Systems—Build Breakdown

While we mostly see MDT products used by competitors, sportsmen, and enthusiasts, that doesn’t mean they aren’t built for the demanding needs of law...
Post by MDT Sporting Goods
Nov 03 2026

Mounting a Rifle Scope? Avoid These 5 Mistakes

Mounting a rifle scope is well within the capabilities of anyone who can use a screwdriver without injuring themselves. However, there are some careful...
Post by MDT Sporting Goods
Oct 29 2026

Ultimate Reloader: Bergara Competition Elite - 6mm Dasher at 1 Mile!

I love it when manufacturers deliver on their promises. In the world of precision rifles, there's an awful lot of hyperbole (anyone remember the...
Post by MDT Sporting Goods
Oct 28 2026

Beyond Rifles and Optics: Four Predator Hunting Essentials

This isn’t going to be another rifle, scope, or caliber article. Instead, I want to talk about the small pieces of gear I’ve learned...
Post by MDT Sporting Goods
Oct 27 2026

Impact Shooting: 7 Sherman Short Magnum at 1 Kilometer

The 7 Sherman Short Magnum continues to impress as a capable long-range hunting cartridge, and Piet put its performance on full display at Impact...
Post by MDT Sporting Goods
Oct 22 2026

Preparing for a Western Coues Deer Hunt

Over the years, I’ve found that my business rarely involves training someone for a weekend and never seeing them again. More commonly, I work...
Post by MDT Sporting Goods
Oct 21 2026