EVERYTHING

YOU NEED TO KNOW

REMOVE THE

Set your Crush It to match the stage time, and when the RO starts his timer, start yours simultaneously. Visually (and audibly) monitor the remaining time in your run, allowing you to gauge when to speed up or slow down. Remove the unknown with the MDT Crush It - Stage Timer.

CUSTOMIZE TO YOUR PREFERENCE

Ready to use out-of-the-box for a preset 2-minute stage, or use Custom Mode to fully customize every aspect of your timer; time, various alert points throughout, tone type, volume, starting tones, and ending tones. Also choose between graphics mode, or digits mode to change how your time is displayed.

TRAIN EFFICIENTLY

Learn how to use your time efficiently and see where you can speed up. Use the stopwatch mode to see how long you’re taking at any point during a stage.

KEEP YOUR EYE ON THE TARGET

Choose when the timer will beep, what the beep sounds like, how loud each beep is, and how many times it will beep each time, letting you know exactly how much time you have left without even having to look at it.

ALWAYS ACCESSIBLE

Mount on any section of Picatinny rail with the included MV3 Inverted 90 Mount so that it’s always in view and easily accessible.

CUSTOMIZE TO YOUR PREFERENCE

Ready to use out-of-the-box for a preset 2-minute stage, or use Custom Mode to fully customize every aspect of your timer; time, various alert points throughout, tone type, volume, starting tones, and ending tones. Also choose between graphics mode, or digits mode to change how your time is displayed.

TRAIN EFFICIENTLY

Learn how to use your time efficiently and see where you can speed up. Use the stopwatch mode to see how long you’re taking at any point during a stage.

KEEP YOUR EYE ON THE TARGET

Choose when the timer will beep, what the beep sounds like, how loud each beep is, and how many times it will beep each time, letting you know exactly how much time you have left without even having to look at it.

ALWAYS ACCESSIBLE

Mount on any section of Picatinny rail with the included MV3 Inverted 90 Mount so that it’s always in view and easily accessible.

RIFLE MOUNTED FOR EASY ACCESS

AUTO POWER OFF TO INCREASE BATTERY LIFE

VISIBLE IN ALL LIGHTING CONDITIONS

WEATHER RESISTANT

MOUNT IN ANY ORIENTATION

CONTROL VOLUME, INTERVAL, TIMING, & TONE

SILENT MODE FOR VISUALS ONLY

BASIC MODE READY TO USE OUT-OF-THE-BOX

CUSTOM MODE FOR EXTENSIVE CUSTOMIZATION

STOPWATCH MODE FOR TRAINING & STAGE SETUP

GRAPHICS & DIGITS MODES

SAVES ALL CUSTOMIZATIONS

COMPATIBLE WITH 2.5MM PRESSURE SWITCH

LASTS FOR 200 2-MINUTE STAGES ON AVERAGE

3 TONE OPTIONS FOR OPTIMAL HEARING & ALERT POINTS

FULL BREAKDOWN OF ALL CUSTOMIZATIONS

COMPATIBILTY

  • Picatinny/Weaver Rail
  • Requires minimum of 0.3" between scope and picatinny rail
  • Included mount provides clearance for up to a 2" wide chassis/stock

SPECIFICATIONS

MATERIALS

Cosmetic Black Anodized
6061 Aluminum
Stainless Steel Hardware

WEIGHT

3 oz

DIMENSIONS

2.625” x 1.35” x 2.85”

BATTERY

WHAT YOU GET

Crush It - Stage Timer

MV3 Inverted 90 Mount

CR1/3N Battery
(Pre-installed)

1/6" Hex key
3/32" Hex key

  • 5 stars: 21 (78%)
  • 4 stars: 4 (15%)
  • 3 stars: 0 (0%)
  • 2 stars: 2 (7%)
  • 1 star: 0 (0%)
R
Ryan S.
Awesome

I absolutely love this timer. It’s been great. I highly recommend it for anyone wanting to work on time management during the stage. Or if you just need a timer to help you.

J
Jonathan O.
What I've been wanting for 20 years

This is basically the one and only stage self-timer to have at this point in time for competition rifle shooting disciplines. Everything else prior has been a repurposed kitchen or lab timer.

M
Mark M.

Every shooter needs a timer, and the CRUSH IT is the best!

G
Goran J.

Great timer. I could figure out the menu in 1min. The only criticism I have is minor, but it can be fixed very easy with a software tweak.

In the custom mode you have a Start Alert and 5 more Alert settings and within those you can change the amount of beeps and how fast/slow they beep. However you cannot change this on the "Start Alert". Its fixed at 3 beeps and fixed speed. I would have like to change the number of beeps or the length of them, but the options are not there.

My idea was to have a setup like this;
1 beep to start at 1:45 (why 3 beeps to start? Makes no sense)
2 beeps at 1:00
3 beeps at 30sec
4 beeps at 15sec

MDT Please fix this. Its just a software tweak. I'm not sure how your engineers missed this. if its a custom mode, let everything be custom.

Besides this minor annoyance, the timer is fantastic. 5starz

J
Jodie N.

Great product that really helps stage management

B
Brad P.

Great fit, easy too use and once again another phenomenal MDT product👍👍

J
Jacque B.

I love the Crush it timer. It's become an extremely useful tool in PRS shooting.

J
Joseph M.
perfect for practice!! i needed

perfect for practice!! i needed it to improve my time management!!

J
Jasen S.
Critical piece of kit for timed stages

If you shoot anything with a timed stage, PRs, nrl, f class, whatever, this will be a critical part of your system.

J
JAN C.
There is probably nothing better yet

Really good timer. The screen is clear, sound is loud enough.

There isnt really any competition for this so i cannot be too harsh, but for the money, it could be better.

I ended up mounting it directly next to the grip, so i could activate it with my thumb. Had to get an aftermarket mount.

Things i would like to see in a V2:

-Better menu, or even better, ability to set it up in an app. The menu is quite cumbersome
-option to dim the screen
-remote button should be included or at least there should be an official one to purchase. No of the aftermarket ones work reliably
-actual speech alerts instead of just beeps, for example "30 seconds remaining" or "10,9,8 etc. "
-use a rechargeable battery and USB-C charging, or at least a battery with better life

Or better yet, just combine it with the send it level into 1 unit

Thank you for taking the time to leave your review and feedback. We are pleased to hear that you are overall enjoying your purchase. We will certainly keep your suggestions in mind for future revisions and designs. If you have any questions, please don't hesitate to reach out to us.

J
John H.
Achilles Heel is the Battery

With any new product there will always be room for improvement. The battery life and the difficulty changing batteries needs work. Changing the part time should be more straightforward and intuitive. In many matches, the part times can vary from 90 to 105 to 120 seconds from stage to stage. Not a simple preset with this timer. Also, while the timer is made to accept input from a pressure switch, this option is not included or offered by MDT. Trying to start the clock while holding a rifle and bag and tripod is ackward at best, if not impossible. I've found the timer most useful for practice rather than during competition.

Thank you for taking the time to post your review. We will keep these ideas in mind for any future iterations. If you need help with anything in the future, please reach out to our support team at support@mdttac.com. Thanks.

c
cory c.
good idea, but it’s not

good idea, but it’s not loud enough and it needs a remote push button to start it

H
HUBERT P.
good

good

D
DANIEL L.
Excellent product.

Definitely a useful tool for PRS. When you buy MDT you get quality and also they have your back. Lost a few screws on my ACC ELITE and they were quick to answer and send me replacments free of charge. It's nice to have a company backup their products.

M
MICHAEL H.
Crush it timer

This is a must for anyone trying to not time out on stages. Or simply for any timed drill. It can be mounted almost anywhere any way if wanted with a few attachments or anyway on a pic rail as it comes with that mount. I LOVE all things MDT, they are rock solid and MDT literally has the best customer service on EARTH. Better than any company I have ever dealt with. Those are bold words too!!!

E
Elizabeth S.
Great gift!

Great tool! Purchased as a Christmas gift for my husband. He did need to purchase different scope rings to mount this, but that’s not a defect in the product , just something I had not taken into consideration. He finds it functional, easy to read, and easy to operate.
It arrived well packaged and in a timely manner.

J
JOHN C.
Great, but still difficult to program!

Love the timer! But you really needed to somehow make it BlueTooth. I have watched the video a few times it's just not that intuitive to program. Lots of features but that just makes navigating through all the menus with one button nightmarish.

Thank you for taking the time to leave your feedback. We will be sure to pass it on to our design team. Thanks!

S
Sean N.
Nice but outrageously priced

I like it but it is just priced too high

Thank you for your review and feedback. If we can help with any questions, please don't hesitate to reach out.

T
TY N.
Phenomenal stage timer

I love the product, quality, simplicity and durability of this timer in particular.

Outstanding little unit. Definitely worth

E
ERIC T.
Great timer

Great timer, love the ability to customize each setting, tone and time. I do wish they went with a better battery solution (which I know they wanted to keep the same as the sendit level, but I think they should just offer a combined unit anyway). But those two aside, it's a great unit but $$$

Thank you for taking the time to leave your review and feedback. If we can help with any questions, please let us know.

L
LARRY S.
Great timer

I am impressed with its size and how easy it is to operate.

R
Richard J.
Expensive but really useful at

Expensive but really useful at a match

R
ROB M.
Crush it timer

Since the release of this timer, I’ve heard people say it’s expensive. I’m here to tell you it’s worth every single penny. This is an invaluable piece of kit for training and competition. With multiple modes, settings, tones and positions, this timer gives you every conceivable scenario that any match course of fire would throw at you. Feeling rushed or not knowing how much time you have in a stage, make that last 5 seconds count and get that impact.
Brilliant product and very well thought out and designed.

M
MARK O.
Quality product but low value for PRS

The pressure switches on the market are cheap and just not sensitive enough to work with this timer. In order to find value with this timer, it has to be operated easily with one hand. Until a good solution is presented it will just be something attached to my rifle and not getting used. This timer has huge potential if you guys could get a convenient, consistent switch developed.

Thank you for the review and comment. If this is something you would like to see us make, please take the time to fill out our Product Request form, which can be found HERE.

https://mdttac.com/product-request/

M
Matt C.
Works great

I’ve used the timer in a couple of matches and find it useful. I’ve found it actually helps me slow down and focus on making batter shots.

H
Hilton M.
Crush It timer

This is a great product. It really helps me slow down and take more time shooting stages.

A
Andrew M.
Amazing Tool

I came from a talking timer that wasn't loud enough and talked to much. It kinda annoyed me.
This crush it timer can be programmed so it beeps when you want it to which is amazing. It will help your stage tempo so you can speed up half way if you are behind or slow down if you are more than half way through a stage when it beeps.