Free-Floated Barrels and The Dollar Bill Trick

Free-Floated Barrels and The Dollar Bill Trick

A free-floated barrel means the barrel does not contact the stock or chassis at any point forward of the receiver. Most shooters were taught to verify this with the dollar bill trick: slide a bill between the barrel and stock all the way back to the receiver. If it passes, the barrel is “free floated.” That test is incomplete.

The goal of a free-floated barrel is to allow the barrel to vibrate consistently during firing. Every shot produces barrel harmonics, whip, and oscillation. If the barrel contacts anything during that movement, accuracy and point of impact suffer. This has been proven repeatedly with slow-motion footage, and it is easily observed in real shooting. Even low-recoiling calibers produce measurable barrel movement.

WHY THE DOLLAR BILL TEST FALLS SHORT

The dollar bill test checks static clearance. Barrel harmonics happen dynamically, under recoil.

You are not sliding a dollar bill under the barrel while the rifle is firing. Add a suppressor, and the problem becomes more pronounced. The added weight at the muzzle changes harmonics and typically pulls the point of impact down. The same thing happens when shooters rest the barrel on a barricade rather than on the chassis. I routinely see impacts shift by 6 inches, from over a foot high to over a foot low, depending on how the barrel is supported. This is why barrels should not come into contact with anything, including the chassis.

If your rifle chassis or stock doesn’t have a large barrel channel like this ACC, you will need to take a close look at your system to make sure it is truly free-floated.

A BETTER WAY TO CHECK

Unless you have a Chassis Rifle System with an oversized barrel channel, you will need to just shoot your rifle a lot. After the first 100 rounds, remove the barreled action from the stock or chassis and inspect it closely. Look near the front of the chassis for wear marks where the finish is beginning to polish or turn silver. I have seen many rifles that passed the dollar bill test show contact after live fire. Another quick check is to apply downward pressure to the barrel by hand. All barrels flex. Heavy profiles flex less. Hunting profiles flex more. If modest pressure brings the barrel into contact with the chassis, that contact is very likely to occur during recoil, especially once a suppressor is added.

MDT DRT Chassis System. A suppressor can affect barrel whip and harmonics.

THE TAKEAWAY

Passing the dollar bill test does not guarantee a truly free-floated barrel. If your barrel contacts the chassis under recoil, it will affect harmonics and point of impact. The only reliable way to confirm true clearance is through live fire followed by inspection. Static tests are convenient. Recoil is honest.

Related Posts

I Was Wrong About .22 Creedmoor

Not long ago, I wrote an article comparing .22 Creedmoor and 6mm Creedmoor. As a huge fan of 6mm Creedmoor, I saw little reason...
Post by MDT Sporting Goods
Oct 08 2026

Hunt Fish Shoot - NEW Bergara Competition Elite! The Ultimate PRS Production Rifle?

The new Bergara Competition Elite gives PRS shooters a competition-ready rifle straight from the factory, pairing Bergara's Premier Action and barrel with an MDT...
Post by MDT Sporting Goods
Oct 07 2026

Modern Day Sniper: The Real 6 Principles of Marksmanship

While access to a long range matters, you don't need to develop the skills to become a proficient marksman. In a recent video, Caylen...
Post by MDT Sporting Goods
Oct 06 2026

HOW TO ZERO A CLIP-ON THERMAL IN THREE SHOTS

Sighting in a thermal can be frustrating, especially for shooters unfamiliar with how a clip-on system works. It’s easy to burn through ammunition making...
Post by MDT Sporting Goods
Oct 01 2026

Long Range Only Shakes Out The MDT CRBN Rifle Stock!

The MDT CRBN has taken the world by storm. I've heard rumors that it is the best carbon fiber stock on the market (so...
Post by MDT Sporting Goods
Sep 30 2026

Four Ways To Sling Carry A Chassis Rifle

Yes, rifles are made to be shot. However, before they can be shot, they must be carried. Fortunately, carrying a rifle is easier than...
Post by MDT Sporting Goods
Sep 29 2026

IMPACT SHOOTING: BABOON HUNTING IN SOUTH AFRICA

Hunting rarely gives you perfect conditions, plenty of time, and a stationary target. More often, the opportunity appears quickly, the wind isn’t doing what...
Post by MDT Sporting Goods
Sep 24 2026

MDT DRT Chassis: Putting It to the Test in West Texas

You can only learn so much about a rifle system on a range. At some point, you have to take it into the environment...
Post by MDT Sporting Goods
Sep 23 2026