Add internal weight to your MDT ACC Premier GEN1, ACC Premier GEN2 and ACC Elite Chassis.
ACC Interior Forend Weights
Regular price
$169.99 USD
In Stock items ship in 1-2 business days
Backordered items ship in 8-10 weeks
30 Day Money Back Returns
Shipping
Returns
Pairs well with
DETAILS
These weights mount on the inside channel of the MDT ACC Premier GEN1 and Elite Chassis forend. With the maximum forend capacity of 5 weights, and a max of 4 on the ACC Premier GEN2, they add 2.6lb to your ACC Chassis System. The interior forend weights can be added and removed without removing your barreled action, simply remove the forend cap, slide them into the desired location under the barrel, and screw them in place from the bottom.
SPECIFICATIONS
- Weight: 0.52 lbs / weight (including screws)
- 5 Pack: 2.60 total weight
- 4 Pack: 2.08 total weight
- Material: Case-hardened Steel
- Underside clearance slot to allow mounting of M-LOK accessories to ACC Chassis forend even with weights installed
- Side clearance slots to allow mounting of M-LOK accessories to ACC Chassis forend even with weights installed
- 3 sets of mounting holes to allow the weight to be shifted inside the barrel channel at 20mm (¾”) increments for tuning the rifle’s balance point
COMPATIBILITY
This product has been designed specifically to fit interior barrel channel of both the ACC Premier GEN1, ACC Premier GEN2, and ACC Elite Chassis Systems, and is not compatible with any of our other chassis systems.
HARDWARE INCLUDED
- Four #10-24 x ½” Flat Head Cap Screws per weight for fastening to the chassis
Featured Videos
D
5 Pack - ACC Elite / ACC Premier GEN1
Fit perfectly. Threadlocker already applied.
S
4 Pack - ACC Premier GEN2
Fit like a champ! Highly recommend MDT products
D
Great products
R
Fit and finish was flawless as expected. Added a good amount of weight. Just need some exteriors, mirage shield and rear weights now.
A
5 Pack - ACC Elite / ACC Premier GEN1
Great addition to great chassis! The machine work (especially the threads and the alignment of the holes) is impressive.
W
5 Pack - ACC Elite / ACC Premier GEN1
Added weights haven’t figured out if I need more or not. No recoil and able see impacts.
M
5 Pack - ACC Elite / ACC Premier GEN1
Perfect fit.
K
4 Pack - ACC Premier GEN2
Easy to install and balancing out the chassis has made for a huge difference. I am only disapointed that I did not balance out my rifle sooner with these.
R
4 Pack - ACC Premier GEN2
These things are great! The fore end of my chassis easily accommodates the weights, so they're tucked up out of the way.
M
5 Pack - ACC Elite / ACC Premier GEN1
Quality product made with quality materials. Fitment was perfect as always. Really helps steady the rifle and deaden recoil.
H
4 Pack - ACC Premier GEN2
Fits with a heavy Palma barrel. Only need 2 to make weight in FTR. Was able to use in 2 guns.
Valued correctly. As it does not denigrate the looks of the gun
E
4 Pack - ACC Premier GEN2
Balanced rifle with large scope mounted
D
5 Pack - ACC Elite / ACC Premier GEN1
Perfect!
R
4 Pack - ACC Premier GEN2
Exactly what I needed to balance out my rifle!
A
4 Pack - ACC Premier GEN2
Worked as advertised. Outta site and helpful.
J
Easy to install, adds up the pounds.
S
perfect as always
C
The weights a machined very well and allow you to balance the refle where you would like. The shape of the weight gives you plenty of room to clear the barrel.
N
Nice fit just the right amount of weight.
V
Weight worked great. Bit pricey but with the money.
C
You have very good products. The weights I bought worked great. Along with everything else I’ve bought. Yall were very helpful. Keep up the good work.
J
These weights worked perfect for me to achieve the perfect balance for my ACC elite.
C
Got perfect balance on my rifle, thanks!
C
Great service great look. Highly recommend !
T
I wasn’t going to leave a review about these and chalk it up to just getting a bad run… but about half of the screw holes on these weights were not tapped correctly and the screws provided were soft and weak. One head snapped off hand tightening one weight. I had to tap the others… not a major deal, just sad that I paid that much for poor QA.
Fit and alignment were great, so two stars. I would caution buyers and be prepared to possibly retap some holes and look at using different screws.
I also want to mention I have spent a lot of money with MDT and their customer service is very lacking, so I didn’t want to deal with them and the insane turn around time to get anything replaced.
Hello, thank you for reaching out today.
Thank you for taking the time to leave your feedback. We're sorry to hear that this was your experience. We stand behind our products and would have happily worked to make things right had you given us the chance to do so. In the previous service requests you have made with us there was no indication that you were unhappy with the resolution to your issues, if we were aware of this we would have worked with you to rectify things in those situations also.
G
Love these and the whole MDT chassis system
S
I added the fore-end weights to my fat girl 6mm CM. Already had two pair and butt stock weights, she now weighs about just a hair over 25 pounds. Yes she is a big thick girl, but recoil is nil, and I can easily see a vapor trail through the NF 7-35 ACTAR
R
Purchased weights for my savage 308. He doesn’t move now! Shoot very accurate!
E
These are a great product
M
Everything is great
M
very nice, shooting 600 yards and MOA all the time now and hitting a 3'' bulleye now. the added weight did the job
