- Product Description
DetailsCut view of chassis showing flat spots where the action touches the chassis.
The LSS-XL chassis system is a variant of our highly popular LSS chassis. The LSS chassis was designed for compact use, short barrelled rifles. A large amount of customers really liked the LSS chassis, but wanted to use a fixed buttstock, and use it with longer barrel systems.
This prompted us to design the LSS-XL chassis system which has a fore-end extended by 3" and is designed to accept fixed rifle stocks without the need of using any adapters. In addition the Lengt of Pull (LOP) is 1" shorter than the standard LSS, as fixed rifle stocks generally are longer than collapsible.
The chassis is designed with v-shaped bedding, allowing you to drop your rifle right in without the need for additional bedding. The bottom of the action housing has been kept round and close to the action without touching keeping maximum strength. The chassis also free floats barrels up to 1" in diameter at the muzzle end.Recoil lug area allows for thicker lugs.
Using our Skeleton Rifle Stock V3 - We do not recommend using our Skeleton Rifle Stock V3 on the LSS-XL. It will work on our LSS using the fixed stock adapter. But on the LSS-XL with a shorter Length of Pull the cheek riser will be in the way of the bolt. (it does work on some actions if the cheek riser is raised). But please check our Skeleton Rifle Stock Light, which was designed specifically for this chassis!
Please note important action specific information at the bottom of this page.
Mounting and Compatible Accessories
The LSS chassis is designed to accept any AR-15 butt-stock and pistol grip (purchased separately), offering the option to customize from the wide variety of Accessories available on the market.
The LSS chassis uses external box style magazines in .223 and .308 caliber for Short Action and .300WM or .338LM magazines for Long Action rifles, and supports installation of bolt on MIL-STN-1913 accessory mounting rails. Mounting holes are spaced for Magpul style L5 (11 slots) and L3 (7 slots) rails (1.600” / 3.200”) to be used on the bottom of the fore end up to 6.5" in length.
Note: Long action magazines come in 3 different lengths: 3.715", 3.775" an 3.850". Our chassis use 3.715 length magazines.
The max thickness of recoil lug recommend is .350" (8.9mm)
- Increases accuracy by up to 21%
- CNC Machined from 6061 Aluminum
- Cerakote Finish in Black or Flat Dark Earth
- Hole spacing for Magpul L5(11slot) and L3(7slot)Rails
- Designed for fixed AR-15 buttstocks, including Skeleton Rifle Stock V3
- Accepts most AR-15 Pistol Grips
- Lightweight, free-floating modular fore-end
- Will accommodate barrels up to 1" diameter.
- Compatible with AICS style magazines in .223 or .308 (SA) and 300WM, 30.06, 338LM (LA). (Long Action Magazine length 3.715)
- Weight: 1.8lb - 2.1lb
What you get, and what you need
The LSS-XL chassis system comes as a 1-piece chassis, with all required mounting hardware included. This includes new action screws, and a screw for the pistol grip.
To complete this chassis on your rifle, the additional items you need to purchase are:
- Any AR-15 buttstock. (Fixed stocks are best suited. For Collapsible stocks consider our LSS Chassis)
- A buffer tube for your buttstock. (Both milspec and commercial work on our chassis)
- An AR-15 Pistol Grip. Ideally without a beavertail, or use a soft (bendable) beavertail.
- At least one magazine
Please also see our HS3 Chassis System.
Howa 1500 / Weatherby Vanguard actions
This is the only action that we manufacture a chassis for, that has a flat bottom action. For this reason only our Polymer magazines will work. It will be a tight fit, and the magazine may need to be modified slightly for a good fit and proper feeding.
For .223 models the bolt stop may be too long. This can easily be modified.
Savage models 10/110 11/111 12/112 16/116
For rifles with the bolt release at the bottom, the bolt release can be engaged through the side of the chassis, using a pin or tool. (Not included)
Tikka T3 - Long Calibers
Only our Metal 3.56 magazine will fit with the chassis for this action and needs to be purchased separately.
The original recoil lug that comes with the rifle is required for installation into the chassis.
Winchester Model 70
Only compatible with MDT Polymer magazines.
For models with 7-18" guard screw spacing and MOA trigger. Must use polymer mags which may require fitting.
Dimensions shown are based on a Remington 700 Short Action.
Length of Pull can be increased by 1" using a Magpul PRS or similar buttstock.
- Product Reviews
Customer Reviews 5 item(s)
- MDT LSS XL Review
A+ Stock 5 minute install and go shoot, this chassis closed up my groups right out of the gate. I'm very pleased to point I bought two of them. Can't go wrong with this chassis, excellent quality, staff is very knowledgeable and answered all my quesitons.
Quality Price Value
- Good stock, good value.
This is a very nicely finished and well thought out Chassis. There are, however a few small problems. First is the hand position, it seems that because the Chassis uses the stock trigger and an AR grip the hand is significantly lower relative to the trigger than on an AR. this is somewhat unsettling as one slips into position to shoot and ones trigger finger is too low on the trigger. Secondly, again compared to an AR the stocks are somewhat low in the comb. I installed a Luth -AR stock and adjusted the comb up to give me a good view of the reticle.
Despite the two small quibbles above, I very much like this stock, it is a huge improvement over the plastic stock that came on my Savage.
Price Value Quality
- Execellent Products
The products were high quality and my R700BDL 6mm Rem fit like a glove. Very easy and quick installation. I am considering also getting the LSS-XL for my Savage 12 Low profile.
Value Quality Price
- Great chassis
Great chassis, fit on my Savage 11 without any issues, very light and durable, I will buy again.
Value Quality Price
- Great chassis for Savage LA
LSS-XL for Savage Long Action: This is a great chassis system. Form, fit, and function ate all very nice. The chassis is very light so for the heavy recoiling calibers, it is something to consider. The machining is done very well. Cuts are precise and the finish is very uniform and proffesshional. My rifle is sub MOA with this chassis and I think it will drastically improve as I get more comfortable with the setup. I always shoot from prone so taking me out of the equation to eval the chassis can be difficult. My rifle comes in at 14.5lbs w/ Leupy Mark 4 16x, Leupy steel rings, steel one piece base, 26" bull barrel 300WM, bipod and MagPul MOE stock. Great chassis at almost half the cost of many others.
Quality Price Value
- Write a Review